AstroStart RS-655 Instruction Manual download pdf (Page 29)

Pair Remote

Remote pairing is a process where the Responder LCD remote, and

the in-vehicle system learn the other’s encrypted identiﬁcation, securing

communication between the two from intruders.

Note: Remotes are pre-programmed from the factory.

Prepare the vehicle system to be Paired with a new remote

1. Turn the key to the On position.

2. Within 5 seconds press and release 1 time the Control button on

the Control Center.

3. Within 5 seconds, press and hold the Control button. The status

LED will ﬂash one time and the horn will honk once to conﬁrm the

system is ready for remote pairing.

4. Release the Control button and proceed below.

Note: If pairing does not result within 60 seconds, the system exits

and the horn honks.

Prepare the new remote to be Paired with the system

1. Make sure the remote control is set for the desired Car 1 or Car

2 operation.

2. Perform the steps under Access menu items section to access the

Pair Remote mode.

3. When the remote beeps 3 times and

PAIR

is displayed the

remote is ready to pair.

4. Press and hold the

button, the horn honks once and the remote

will emit several tones to conﬁrm successful pairing.

SUCCESS

displayed and the remote returns to the main menu.

Note:

FAILED

will be displayed and the remote will stay in the pair

mode in case of an unsuccessful pairing. Check the system status and

try again.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 55 56

No comments

AstroStart RS-655 Instruction Manual Page 29