AstroStart RS-655 Instruction Manual download pdf (Page 39)

Valet Mode

Valet mode can be entered and exited by performing the Remote Valet

command or manually using the vehicle key and the control button.

When entered, the optional Failsafe Starter Kill is defeated while the

convenience features still operate normally.

Lock and Unlock commands still lock and unlock the doors while the

VALET

text and beeps play to conﬁrm.

Use the following steps to manually enter and exit Valet Mode:

1. Turn the ignition switch On and then Off

2. Immediately press and release the control button once

3. The control center LED turns On when entering and Off when

exiting.

Power Save

To reduce power consumption the control center status led modiﬁes its

output if the vehicle is parked for an extended period. If Locked the

ﬂashing is reduced after 24 hours. When Valet mode is On the LED

will turn off 1 hour and will reset each time the ignition is turned off.

Rapid Resume

If power is ever disconnected by a mechanic, the system will resume

the state it was in at the time of disconnection, when power is recon-

nected.

Automatic Remote Updates

The system sends a silent message to all remote controls after any

major action has occurred. When the remote receives this message it

updates the status screen icons. This way all users are able to quickly

review the system status just by accessing the status screen.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 55 56

No comments

AstroStart RS-655 Instruction Manual Page 39